Firmware/Software for XORO HRM 7670 TWIN ---------------------------------------------------- Version: V 121 Software date: 19.07.2022 readme_en.txt: 25.07.2022 Improvements in version V121 (19.07.2022) - New UI-Dialog to solve LCN conflicts manually after automatic channel scan Notes for customers updating devices with firmware version <72: - When installing this software, all programmed timers will be deleted. - Channel lists created with earlier software are not compatible with this software. When installing this software new internal configurations are created. If an old user database (channel list) is loaded from USB, the new configuration will be lost and some functions (e.g. Timeshift) no longer work correctly. The correct configuration is restored by loading the factory settings. 1) Supported devices: ---------------------------------------------------- - XORO HRM 7670 TWIN First, please check whether the firmware version V 121 is already installed on your receiver. You can display the version of the installed firmware in the following menus: "MENU/System Information/Software Version". If software version V 121 is already installed, you are already up to date and do not need to do anything (see "Notes" below). 2) Update instructions ---------------------------------------------------- Please read the following instructions carefully to avoid damaging your unit during the update process. By starting the firmware update procedure, you accept that you perform this procedure at your own risk. a) Copy the file "castpal.usb" to a USB memory stick which can be read by the receiver and is formatted with the FAT32 file system. NTFS file system is not suitable for the update! b) Switch on the receiver. c) Connect the stick prepared in step "a)" to the receiver. d) The message "A new receiver software is available [...]" is displayed on the screen. e) Select the "OK" button with the arrow key [<]or [>]. Confirm your selection with the [OK] button. f) The receiver restarts and the update process begins. A progress bar appears on the screen. -> To avoid damage, do not press any button and do not switch off the receiver under any circumstances. Please wait until the receiver restarts automatically. The whole process can take several minutes! g) After the update process is finished, the receiver restarts. h) Disconnect the USB stick from the receiver. You can check the successful installation in the following menus: "MENU/System Information/Software Version". The version V121.0 (svn 16187 Jul 19 2022 16:53:48) must be displayed here. Notes: If you do not see the message "A new receiver software is available [...]" (step d), this may be due to the following reasons: - The update file is damaged or the file name has been changed. Download the file again and check the file name. Some internet browsers change file names automatically. The file name must be castpal.usb! - Software version V 121 (or higher) is already installed on the receiver. - The receiver does not recognise the USB stick, please try another stick. - The file system is damaged or not FAT32. Format the stick as described in the manual. Then copy the update file to the stick again. 3) Customer service --------------------------------------- ERS GmbH Electronik Repair Service Weidegrund 3/Hall 1 21614 Buxtehude Germany E-mail: support@ersservice.de Phone: +49 4161 800 24 24 (Mon.-Fri. 11:00 - 17:00h; German and English) 4) Version history --------------------------------------- Improvements in version V 121 (23.05.2022) - OSD Language "Polish" added Improvements in version V 118 - Problems with incomplete event descriptions in the EPG solved (Croatia) Improvements in version V 95 - Time zone problems fixed Improvements in version V 94 - Weather app removed - Removed "delete function" in Media Player - OSD message on missing/weak signal corrected - Italy: Stations in "Main Overflow" area are numbered continuously Improvements in version V 92 - OSD languages "Italian" and "Czech" added - Factory default: Italy - Added support for LCN in Italy - Problems with EPG display in Czech Republic fixed Improvements in version V 73 - Problem solved that existing recordings were occasionally not displayed in the recording list. - Message after loading a channel list corrected. Improvements in version V 72 - Various code and driver updates to improve reliability - Timer pre- and post-run time can now be set separately from each other - The receiver can be switched to active standby mode by the user while recordings are running - New dialogue for saving and loading databases (channel list) when multiple storage devices are connected - Timing problems with subtitles of certain channels fixed - When starting recordings manually, the recording duration is now set depending on the EPG (end time of the current programme) and the timer padding time - Problem solved where manually set IP addresses and APP settings are not saved - Timer storage format revised Improvements in version V 3.0 - Problems with editing Favourites lists solved - Speed of the channel list menu improved when 200 or more channels are in the list - Various code and driver updates to improve reliability - Fixed problems when converting GPT to MBR disks - Automatic restart after loading channel lists/user data from USB devices. Note: Channel lists created with previous software are not compatible with this software. Old channel lists saved on a USB device cannot be loaded. 5) readme_en.txt History --------------------------------------- 25.07.2022 First release (THL) ©2022 MAS Elektronik AG