Firmware for XORO HRS 8830
--------------------------------------------
Version: V0.17
Software-Date: 05.02.2021
readme.txt: 07.05.2021

Release Notes V0.17:
- Added an option to control the brightness of the LED display


1) Supported Devices
--------------------------------------------
- XORO HRS 8830 BLACK

Please check the model number at the rating label of the device.

It is possible that the latest Software is already installed to your HRS 8830. You can check the firmware version
in Menu/Tools/Sytem Information. You don't need to install this update if Software Version V0.17 is already installed.


2) Installation
--------------------------------------------
Please follow the instruction carefully to avoid damaging your device! Contact your local XORO service partner
if there are any questions.


a) Copy the firmware file "dts3470.udl" to an USB-Stick. File system shall be FAT/FAT32.
   The installation will fail if another filesystem is used. 
b) Power on the Receiver and connect the USB-Stick
c) Press MENU on the remote controller
d) Navigate to the Menu/Tools/SW Upgrade/USB Upgrade. You need to enter the PIN you set during first time installation
   to continue.
e) Press OK and select the file "dts3470.udl".
 
f) Press OK to start the firmware update.

-> The Receiver will reboot and display a progress bar on TV screen. Don't not turn off the Receiver. Do not
   remove power. Do not press any key. It may take several minutes to install the software. 
 
g) The Receiver will reboot once the software update has finished.


3) Contact
--------------------------------------------
ERS GmbH Elektronik Repair Service
Weidegrund 3/Halle 1
21614 Buxtehude
Germany

E-mail:	 support@ersservice.de
Phone: +494161 800 24 24 (Mo.-Fr. 11:00 - 17:00, DE/ENG)

XORO by MAS Elektronik AG


5) readme.txt history
--------------------------------------------
07.05.2021	1st release (TL)

©2021 MAS Elektronik AG